datasheet www.rohm.com ? 2013 rohm co., ltd. all rights reserved. dtb543x series pnp -500ma -12v digital transistors (bias resistor built-in transistors) l outline l features l inner circuit 1) built-in biasing resistors 2) built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit). 3) the bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. they also have the advantage of completely eliminating parasitic effects. 4) only the on/off conditions need to be set for operation, making the circuit design easy. 5) complementary npn types :dtd543x series 6) lead free/rohs compliant. l application switching circuit, inverter circuit, interface circuit, driver circuit l packaging specifications 8 3,000 x33 DTB543XE emt3 1616 tl 180 basic ordering unit (pcs) marking dtb543xm vmt3 1212 t2l 180 8 8,000 x33 part no. package package size (mm) taping code reel size (mm) tape width (mm) i c(max.) - 500ma r 1 4.7k w r 2 10k w parameter value vmt3 emt3 v cc - 12v dtb543xm (sc-105aa) DTB543XE sot-416 (sc-75a) out in gnd out in gnd 1/6 2013.04 - rev.b downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet dtb543x series l absolute maximum ratings (ta = 25c) supply voltage input voltage collector current power dissipation junction temperature range of storage temperature l electrical characteristics (ta = 25c) *1 characteristics of built-in transistor *2 each terminal mounted on a reference footprint mhz transition frequency f t *1 v ce = - 10v, i e = 5ma f = 100mhz - 260 - k w resistance ratio r 2 /r 1 - 1.7 2.1 2.6 - input resistance r 1 - 3.29 4.7 6.11 m a dc current gain g i v o = - 2v, i o = - 100ma 140 - - - output current i o(off) v cc = - 12v, v i = 0v - - - 0.5 v input current i i v i = - 5v - - - 1.4 ma output voltage v o(on) i o / i i = - 100ma / - 5ma - - 0.07 - 0.3 v v i(on) v o = - 0.3v, i o = - 20ma - 2.5 - - - 0.3 input voltage v i(off) v cc = - 5v, i o = - 100 m a - - t stg - 55 to + 150 c parameter symbol conditions min. typ. max. unit p d *2 150 mw t j 150 c v in - 12 to + 7 v i c(max.) *1 - 500 ma parameter symbol values unit v cc - 12 v 2/6 2013.04 - rev.b downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet dtb543x series l electrical characteristic curves (ta = 25c) 0 50 100 150 200 250 300 350 0 0.5 1 1.5 2 - - - - - - - - - - - - 1.6ma - 1.4ma - 1.2ma - 1ma - 0.8ma - 0.6ma - 0.4ma - 0.2ma i i = - 1.8ma ta= 25oc pulsed 1 10 100 0 0.5 1 1.5 2 2.5 3 - - - - - - - - - ta= 125oc 25oc - 40oc v cc = 5v pulsed 0.1 1 10 0.1 1 10 100 1000 - - - - - - - - v o = 0.3v pulsed ta= - 40oc 25oc 125oc 1 10 100 1000 0.1 1 10 100 1000 - - - - - ta= 125oc v o = 5v pulsed ta= 25oc ta= - 40oc fig.1 input voltage vs. output current (on characteristics) input voltage : v i(on) [v] output current : i o [ma] fig.2 output current vs. input voltage (off characteristics) output current : i o [ma] input voltage : v i(off) [v] fig.3 output current vs. output voltage output current : i o [ma] output voltage : v o [v] fig.4 dc current gain vs. output current dc current gain : g i output current : i o [ma] 3/6 2013.04 - rev.b downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet dtb543x series l electrical characteristic curves (ta = 25c) 0.001 0.01 0.1 1 1 10 100 1000 ta= 125oc i o /i i =20/1 pulsed ta= 25oc ta= - 40oc - - - - - - - - fig.5 output voltage vs. output current output voltage : v o(on) [v] output current : i o [ma] 4/6 2013.04 - rev.b downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet dtb543x series l dimensions (unit : mm) dimension in mm / inches vmt3 min max min max a 0.45 0.55 0.018 0.022 a1 0.00 0.10 0.000 0.004 b 0.17 0.27 0.007 0.011 b1 0.27 0.37 0.011 0.015 c 0.08 0.18 0.003 0.007 d 1.10 1.30 0.043 0.051 e 0.70 0.90 0.028 0.035 e h e 1.10 1.30 0.043 0.051 l 0.10 0.30 0.004 0.012 lp 0.20 0.40 0.008 0.016 x - 0.10 - 0.004 min max min max b2 - 0.37 - 0.015 b3 - 0.47 - 0.019 e1 l1 - 0.50 - 0.020 dim milimeters inches 0.40 0.02 dim milimeters inches 0.80 0.031 b1 d e b e h x s a a c l lp a1 a s e1 l1 b2 b3 l1 e e pattern of terminal position areas [not a recommended pattern of soldering pads] 5/6 2013.04 - rev.b downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet dtb543x series l dimensions (unit : mm) dimension in mm / inches emt3 b1 d e b e h e x s a a c q a3 l1 lp a1 a s e1 l1 l1 b3 e b2 pattern of terminal position areas [not a recommended pattern of soldering pads] min max min max a 0.60 0.80 0.024 0.031 a1 0.00 0.10 0.000 0.004 a3 b 0.15 0.30 0.006 0.012 b1 0.25 0.40 0.010 0.016 c 0.10 0.20 0.004 0.008 d 1.50 1.70 0.059 0.067 e 0.70 0.90 0.028 0.035 e h e 1.40 1.80 0.055 0.071 l1 0.10 - 0.004 - lp 0.15 - 0.006 - q 0.05 0.25 0.002 0.010 x - 0.10 - 0.004 min max min max b2 - 0.40 - 0.016 b3 - 0.50 - 0.020 e1 l1 - 0.70 - 0.028 1.10 0.043 dim milimeters inches 0.25 0.010 0.50 0.020 dim milimeters inches 6/6 2013.04 - rev.b downloaded from: http:///
r1102 a www.rohm.com ? 2013 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representativ e and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10)11) 12) 13) 14) downloaded from: http:///
|
